12/20/2023 0 Comments 2017 cadillac srxWith the vehicle off, hold down the ignition button for 5 secondsĪ. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.ģ. The horn will chirp, after the vehicle has received a signal from each sensor. Starting with the LF tire, use your TPMS Scan Tool to scan each sensor in the following order: LF, RF, RR and LR. Hold down the SEL/Checkmark button until the horn sounds twice.Ħ. Exit the “Settings” menu and scroll to the Tire Pressure Screen.ĥ. Using the streering wheel’s keypad, select “Settings,””Display Options,” then “Tire Pressure” to turn on the Tire Pressure readout display”Ĥ. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. Hold down the trip odometer button for five seconds then press the button again to confirm.ĥ. Sensor Relearn Procedure not equipped with Steering Wheel Buttons:Ĥ. Scroll to the Tire Pressure screen using the steering wheel buttons then hold down the checkmark button until the horn sounds. Turn the ignition switch to the ON position (engine off) and lower the driver side window.ģ. Ensure all tires are inflated to the pressures listed on the tire placard.Ģ. Sensor Relearn Procedure with Steering Wheel Buttons:ġ. Using the keyless entry (key fob), press and hold the lock and the unlock buttonssimultaneously until the horn sounds. ![]() Relearn Procedure for Models Equipped with Keyless Entry:ģ. Press the Vehicle Information button (located to the left or right of the instrument cluster) repeatedly until “LEARN TIRE PRESSURES” is displayed. Relearn Procedure for Models Equipped with a Driver’s Information Center (DIC):ģ. After activating the LR tire, the horn will chirp twice signifying the relearn is complete. The horn sounds twice to signal the receiver is in relearn mode.Ĥ. Turn the headlight switch from OFF to parking lamps 4 times within five seconds. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position).ģ. Procedure using another Properly Formatted TPMS Scan ToolĢ. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.Ħ. Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR and LR. Hold down the trip odometer button for 5 seconds, then press the button again to confirm.ĥ. Press and release the trip odometer button to scroll to the Tire Pressure display.Ĥ. Sensor Relearn Procedure (select models):ģ. After activating the LR tire, the horn will chirp twice signifying the relearn is complete.ĥ. Scroll to the Tire Pressures screen, using the steering wheel buttons, then hold down the checkmark button until the horn sounds.Ĥ. Turn ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver’s side window.ģ. Inflate all tires to the pressure listed on the placard.Ģ. Note: TPMS Scan Tool is Necessary when Relearning the TPMS of this Model.ġ. ![]() Unlike the previous model year, you’ll need TPMS Relearn Tool to reset the Tire Pressure Monitoring System in this 2011 2012 model years.Instruction on how to reset the TPMS light / Warning indicator on Cadillac Cars. Adjust the tire pressure in all four tires recommended on the tire placard.The TIRE LEARNING ACTIVE message will disappear Turn off the ignition after you reset the last tire.Repeat the process for the passenger side front tire, passenger side rear tire, and the driver side rear tireĪ horn chirp will confirm that the sensor has been reset.Start from the driver side front tire, remove the valve cap, and then increasing or decreasing the tire’s air pressure until a horn chirp sounds The horn will sound twice and the TIRE LEARNING ACTIVE message will appear indicating the TPMS matching process has started Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously for five seconds.If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal Turn the ignition key to the “ON” position without starting the engine.Follow these instructions to get started: If you have 2004 2005 2006 2007 2008 2009 2010 Cadillac SRX, you can reset the TPMS by increasing or decreasing the tire pressure without a tool.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |